Skip to main content

[TH] How to Pair a Beam Card Terminal (Bolt+) with Qashier POS

Pair a Beam Bolt card terminal with Qashier POS in Thailand, take card and e-wallet payments on it, and unpair or replace the terminal.

Pair a Beam card terminal (Bolt) with your Qashier POS so that card and e-wallet payments you start on the POS are completed on the Beam terminal, with the result written back to the POS automatically.

Applies to: Thailand · Qashier POS · the Bolt+ integration add-on (Beam Direct KYC) · Beam terminal payment methods enabled on your store by Qashier. The Beam Terminal Pairing item appears in Settings only after at least one Beam terminal payment method is enabled.

Before you start

  • You have completed your Beam merchant onboarding (KYC) and received a Beam Bolt terminal.

  • The Bolt+ integration add-on is active on your plan. It is a paid add-on; contact support for pricing and activation.

  • The Beam terminal is switched on and shows its 8-character pairing code.

  • Each store can have one paired Beam terminal at a time. To swap terminals, unpair the old one first.

Pair the terminal

  1. On Qashier POS, tap the ☰ menu, then Settings.

  2. Tap Beam Terminal Pairing.

  3. In Pairing code, type the 8-character code shown on the Beam terminal. Letters and numbers only.

  4. Tap Pair device.

  5. The screen switches to Paired device and shows the Device ID, the Connection ID and Status: Active.

Take a payment on the Beam terminal

  1. Ring up the sale and tap Pay.

  2. Tap the Beam terminal tile for the method the customer wants: card, PromptPay, LINE Pay, TrueMoney, ShopeePay, WeChat Pay, Alipay, Alipay+ or SPayLater. The Beam terminal tiles are logo tiles shown first on the payment screen, before your other payment methods. The tiles you see depend on what is enabled for your store.

  3. The Beam terminal shows the amount. The customer completes the payment on the terminal: tap or insert the card, or follow the e-wallet prompt on the terminal.

  4. When Beam approves the payment, the POS completes the sale and prints the receipt.

To cancel while the terminal is waiting, press back on the POS. The Beam terminal has no cancel button of its own, so you always cancel from the POS. For the first few seconds the POS only shows Payment is in progress on the terminal. Please wait…; after that it shows Payment is processing and asks you to confirm that the customer has not completed payment on the terminal. Tap Cancel Payment to stop the transaction, or Continue Processing to keep waiting. If the customer paid in the meantime, the POS shows Payment already approved on payment terminal… and completes the sale. Wait for the POS to return to the payment screen before you start a new sale.

Unpair or replace the terminal

  1. Go to ☰ > Settings > Beam Terminal Pairing.

  2. Tap Unpair device. The screen returns to the pairing form.

  3. To pair a replacement, enter its code and tap Pair device.

What you should see

  • Beam terminal payments appear in Transaction Record on the POS and under Transactions in QashierHQ with the method name (for example Card Payment or PromptPay).

  • Payouts follow your Beam settlement schedule. See [TH] Beam QR FAQ: KYC, Refunds and Payouts.

If something goes wrong

Symptom

Likely cause

What to do

No Beam Terminal Pairing item in Settings

No Beam terminal payment method is enabled for the store

Contact support to enable the Beam terminal methods, then reopen the POS home page to sync settings

"Pairing code must be 8 alphanumeric characters."

The code was mistyped or has spaces

Re-enter the code exactly as shown on the terminal

"A device is already paired to this store. Please unpair it first before pairing a new one."

Another terminal is still linked to this store

Tap Unpair device, then pair the new terminal

"Network error, please try again."

The POS has no internet

Check Wi-Fi or the LAN cable and try again

Status: Inactive after pairing

The terminal is off, offline or not yet activated by Beam

Power the terminal on and connect it to the internet; if it stays inactive, contact support

The POS keeps waiting for the terminal

The customer has not completed payment on the terminal

Ask the customer to finish on the terminal, or press back on the POS and tap Cancel Payment

For a void or refund of a payment taken on the Beam terminal, contact support with the receipt number.

Related articles

Last verified: 25 Sep 2026 · Markets: TH

Did this answer your question?