4G Configuration
1. Locate the Micro SIM card slot on the side of the Soundbox as shown.
2. Open up the slot cover to insert the micro SIM card into Soundbox and close the slot cover.
Note: When inserting the micro SIM card, make sure that the main screen of the Soundbox and the micro SIM card chip are facing you for the correct orientation of insertion as shown:
WiFi Configuration
1. To determine whether the Soundbox is in 4G or WiFi mode, please refer to the back LED screen. If you see the letter "G" displayed, it means that the Soundbox is currently in 4G mode.
2. To access the network configuration mode, simply press and hold the "M" button. Then, use the "-" or "+" button to conveniently select either the WiFi Mode or 4G Mode according to your preference.
3. After selecting the preferred configuration mode, press the power button twice to confirm your selection.
4. The device will then reboot. Once the device has finished rebooting, use the keypad to select "F1" and allow the device to scan for networks.
5. Utilise the "F1" and "F2" buttons on the keypad to navigate and select the appropriate WiFi network. Once selected, press "Enter" to proceed to the next page where you can enter the password for the network.
To enter the password, utilize the keypad and only press "F2" to select the correct character.
6. Once password is successfully keyed in, select the enter button to allow device to connect to the WiFi network. If successful it will display the following message on screen.
Note: You can also check from the LED screen to see if there is WiFi signal as shown:
