You will need an internet connection to use the QashierX1 POS.
Please note that there are 2 models
The only difference: A Built-in barcode scanner.
With the convenience of a built-in barcode scanner, staff can effortlessly scan product barcodes and quickly proceed to check-out and payment.
Overview
What's in the box of the QashierX1 POS
QashierX1 POS Terminal
Power plug
Micro USB cable to connect POS to Printer
1 x receipt roll
Set up Instructions for the QashierX1 POS
Charging the Qashier X1 POS
Insert the end of the charger into the charging port found at the back of the Qashier X1 terminal:
Turn on Qashier X1 POS
Long hold the top button located on the left of the terminal.
Change/Insert receipt roll of the Qashier X1 POS
Open the cover at the back of the terminal.
(Remove any remaining paper from the previous roll and any loose pieces.)
Hold the new roll so that the paper feeds from the top, and place it into the compartment with the paper exit towards the front.
Close the cover of the payment terminal, making sure that the paper roll is fed through the opening.
Receipt Paper: 57mm x 35mm Thermal Receipt Paper
Perform test print:
Select the "☰" button on the top right corner of the homepage
Select ‘test in-built printer’
You should see a sample printout.
Sample Print:
How to connect the QashierX1 to a cash drawer?
